C2C Fashion and Technology
 

Facial recognition device with Body Temperature Measurement

Flat Monocular Living Body Temperature Measuring Face Recognition Instrument
Produttore:: C2C
Cod: TR-309
Marchi: C2C
Chiama per un preventivo

TR-309 Flat Monocular Living Body Temperature Measuring Face Recognition Instrument

This product is a mature and stable face recognition device that has been developed and improved over the years.This equipment is easy installation and cost-effective and widely accepted by the market. This equipment is widely used in government offices, intelligent buildings, office buildings, high-end property communities, colleges and universities, enterprises and institutions, industrial and mining enterprises and other places.

Features:

  1. Using the most advanced face algorithm, face recognition is fast and accurate.The product's performance indicators such as recognition and speed are at the leading level in the industry.
  2. Large capacity of the product: 10,000 faces (expandable to 50,000 people)
  3. Using two imported super bright infrared lights and high-definition cameras, which has strong adaptability to the environment, good at night identification.。
  4. Supporting living body detection, which can avoid the false recognition when using planar images such as photos.
  5. Supporting the body temperature test function, the temperature can be accurate to 0.3 degrees.
  6. Supporting query of body temperature report.

 

Technical Parameter

   Product No.

TR-309

Hardware

CPU

Hi3516V500 processor

RAM

RAM 512MB

ROM

ROM 8GB

System

Linux

Display

7 inch LCD display

Resolution

1024*600@60HZ

Appearance material

Aluminum alloy shell, organic glazed panel

Function

Recognition height

1.2-2.2 meters

Recognition distance

0.5-3 meters

Face angle

pitch [-35°~+35°]

pitch [-35°~+35°]

roll [-35°~+35°]

 

Face angle

pitch [-35°~+35°]

pitch [-35°~+35°]

roll [-35°~+35°]

Recognition technology

Living body detection, embedded visible light face recognition, adapt to most indoor and outdoor environments, can quickly identify on the move

Recognition time

Detection 20ms; comparison 100ms / 10,000 people; feature extraction 150ms

Status Display

Name broadcast display, custom information broadcast display

Face library

50,000

Main control board interface

Power interface

1 external socket and 1 internal 6P socket (with STB function) DC 12V input

Network interface

1 RJ45 10M / 100M adaptive Ethernet port

Expansion interface

1 UART, 1 RS485

Headphone / MIC interface

1 external headphone audio output socket (GB: GND, MIC, R, L)

SD card interface

Up to 256GBTF card

USB2.0 interface

1 USB HOST door open output

1 brake open output (normally open, normally closed)

Wiegand interface

1 Wiegand output

Fill light signal

1 fill light signal output, 1 light sensor signal input

Camera parameters

Camera

2MP, flat-angle wide dynamic camera, automatic white balance, automatic backlight optimization

Effective Pixels

1920*1080

Lens

1 / 2.9 inch image sensor, 4mm focal length, F2.1 aperture

Cell size

2.2um X 2.2um

Minimum illumination

Color 0.005Lux @F1.2(ICR)

Signal-to-Noise  ratio 

≥48db(AGC OFF)

Wide dynamic range            

≥100db

Interface Type

LVDS

Card reader module

(Optional)

Identification card type

Read M1IC card serial number and ID card serial number

RF working frequency

13.56MHZ

Effective distance

<3cm

Reading rate

15 times / second

ID module

(Optional)

Standard specification

Meets ISO / IEC 14443Type B standards,And "GA450-2013 Desktop Resident ID Card Reader General Technical Requirements、

"GA467 Resident ID Card Verification Security Control Module Interface Technical Specification"、"GA / T1011-2012 General Technical Requirements for Fingerprint Reader of Resident ID Card"

Card reading time

<1s

Reading distance

0-30mm

Data interface

USB

Power Specifications

USB powered

Operating frequency

13.56MHZ±7KHZ(fc)

General parameters

Operating temperature

-10℃ - +50℃

Operating   humidity

10 ~ 90% relative humidity, non-condensing

Powered by

DC12V/2A

Power consumption

≦15W

Size

218*116*22mm (length * width * height))

Weight  

0.3 kg (varies according to configuration)

Installation method

Wall and column installation

 

Interface Type

LVDS

Card reader module

(Optional)

Identification card type

Read M1IC card serial number and ID card serial number

RF working frequency

13.56MHZ

Effective distance

<3cm

Reading rate

15 times / second

ID module

(Optional)

Standard specification

Meets ISO / IEC 14443Type B standards,And "GA450-2013 Desktop Resident ID Card Reader General Technical Requirements、

"GA467 Resident ID Card Verification Security Control Module Interface Technical Specification"、"GA / T1011-2012 General Technical Requirements for Fingerprint Reader of Resident ID Card"

Card reading time

<1s

Reading distance

0-30mm

Data interface

USB

Power Specifications

USB powered

Operating frequency

13.56MHZ±7KHZ(fc)

General parameters

Operating temperature

-10℃ - +50℃

Operating   humidity

10 ~ 90% relative humidity, non-condensing

Powered by

DC12V/2A

Power consumption

≦15W

Size

218*116*22mm (length * width * height))

Weight  

0.3 kg (varies according to configuration)

Installation method

Wall and column installation